Woodpol NC Sealer (14)

76.005,258.00

PRODUCT DESCRIPTION
WOODPOL WOOD SEALER is a nitrocellulose base air-drying Sealer developed specially for wooden product before top coating.
Woodpol wood sealer normally uses on previously applied & well sanded woodpol wood filler to achieve a flat & smooth finish. It is compatible with a wide range of top coat such as Melamine, Polyurethane & NC clear lacquer.

PERFOFMANCE
» Provides fast drying.
» Excellent filling prope rties.
» Good sandability & adhesion.

 

Clear selection
Browse Wishlist
Compare
SKU: N/A Categories: ,

Description

APPLICATION PROCEDURE
» Wood surface must be dry and free of dust and loose particles. Sand the surface along grains with emery paper # 100 or 180.
»  Fill the wood grains by using Woodpol wood filler. Remove excess of wood filler immediately. Allow it to dry for 1- 2 hours. Sand with emery paper #180 followed by 320.
» Stir the content thoroughly before use to make it homogenous.
» Apply 2 – 3 coats of Woodpol sanding sealer by spraying after mixing with good quality NC thinner or by putty knife or muslin cloth.
» Allow it to dry for 1.5 – 2 hours. Sand with emery paper # 320 or 400.
» Repeat above steps if necessary to achieve a flat & smooth surface.
» Now the surface is ready for Applying Woodpol NC clear lacquer, Woodpol melamine, Woodpol polyurethane single pack or Woodpol polyurethane two pack (interior)..

PRECAUTIONS
While application, excess of wood filler should be removed immediately other wise waviness will appear on surface after application of top coats.

1 Recommended use Interior wood applications
2 Product description Air-drying sealer base on nitrocellulose.
3 Appearance Transparent pale to light brown smooth paste.
4 Consistency Ready to use but can mix with good quality NC Thinner.
5 Viscosity 90-100 sec
6 Solid 37 ± 2
7 Specific gravity 0.94 -1
8 Method of application By spraying, putty knife or muslin cloth.
9 Recoating time 1.5 – 2 hours.
10 Covering (theoretical) 80-90 sq. ft. / coat / by rag
60-80 sq. ft. / coat / by spray.
11 Packing 500 ml, 1 Ltr, 4 Ltrs, 20 Ltrs.

PRECAUTION
While application, excess of wood sealer should be removed immediately when applied with putty knife or muslin cloth, other wise waviness will appear on surface after application of top coat.

NOTE :
Woodpol N. C. Wood Sealer & Woodpol N. C. Wood Sealer (Pale) both are the same product except Pale is very light in color.

GENERAL INFORMATION
»  Stir the content well before use since soft sedimentation may occur on storage.
»  Recoating time may be more in case of high humidity condition and / low ambient temperature for smooth sanding.
»  Coverage varies depending on film thickness & nature of wood.

HEALTH & SAFETY INFORMATION
»  Handle products is area of good ventilation. Avoid inhaling since product contains volatile organic solvents.
»  Wear normal protective overall. Solvent resistance hand gloves, eye goggles are recommended. Avoid eye & skin contact.
»  The product is flammable and container should therefore be kept away from fire & spark or any ignition source.

STORAGE, HANDLING & DISPOSAL
»  Store in original container is cool, dry & well ventilated place.
»  While handling avoid inhalation and skin contact. Force ventilation or fresh air mask should be used in confined spaces.
»  Dispose in land filling and not in drawn or water ways.

Additional information

Pack size

, , , ,

Resources

 

Download file here

 Woodpol Nc Sealer

 

Reviews

There are no reviews yet.

Be the first to review “Woodpol NC Sealer (14)”

Your email address will not be published. Required fields are marked *