1 Wood surface must be dry and free of dust and loose particles. Sand the surface along grains
with emery paper # 100 or 180.
2 Fill the wood grains by using Woodpol wood filler. Remove excess of wood filler immediately. Allow it to
dry for 1- 2 hours. Sand with emery paper #180 followed by 320.
3 Stir the content thoroughly before use to make it homogenous.
4 Apply 2 – 3 coats of Woodpol sanding sealer by spraying after mixing with good quality NC thinner or by
putty knife or muslin cloth.
5 Allow it to dry for 1.5 – 2 hours. Sand with emery paper # 320 or 400.
6 Repeat above steps if necessary to achieve a flat & smooth surface.
7 Now the surface is ready for Application of Woodpol NC clear lacquer, apply N. C. Lacquer, dilute with
N. C. Thinner and spray or brush
1 Recommended use : Interior wood application.
2 Product Description : Air-drying Lacquer base on nitrocellulose.
3 Appearance : Transparent pale to light brown smooth Clear Lacquer.
4 Consistency : Ready to use but can mix with good quality NC Thinner.
5 Solid 40 : ± 2
6 Specific gravity : 0.980 – 1
7 Method of application : By spraying, putty knife or muslin cloth.
8 Recoating time : 1.5 – 2 hours.
9 Covering (theoretical) : 80-90 sq.ft. / coat / by rag
60-80 sq.ft. / coat / by spray.
10 Packing : 500 ml, 1 Ltr, 4 Ltrs, 20 Ltrs.
While application, excess of wood sealer should be removed immediately when applied with putty knife or
muslin cloth, other wise waviness will appear on surface after application of top coat.
1 Stir the content well before use since soft sedimentation may occur on storage.
2 Recoating time may be more in case of high humidity condition and / low ambient temperature
for smooth sanding.
3 Coverage varies depending on film thickness & nature of wood.
HEALTH AND SAFETY INFORMATION
1 Handle products in areas of good ventilation. Avoid inhaling vapors since product contains
volatile organic solvents.
2 Wear normal protective overalls. Solvent resistant hand gloves, eye goggles are
recommended. Avoid skin contact.
3 The product is flammable and container should therefore be kept away from fire & spark
or any ignition source.
STORAGE, HANDLING & DISPOSAL
1 Store in original container in cool, dry & well ventilated place.
2 While handling, avoid inhalation & skin contact. Force ventilation or fresh air mask should
be used in confined spaces.
3 Disposal in land filing & not in drain or water ways.