Woodpol Melaminised Sealer Filler Primer White (5)

129.006,674.00

WOOD POL Natural Wood finish is a premium quality acid cured coatings which offers lasting & durable finish to wood & wood substrate with excellent water, scratch, chemical, hot beverages, stains & termite resistant properties. Being both cosmetically & functionally superior, it maintains excellent quality and uniqueness of wood grains & texture of wood for years.

 

Clear selection
Compare

Description

APPLICATIONS PROCEDURE

FOR NEW WOOD
Wood article to be coated must be dry & free of dust & loose particles. Sand surface along the grains with emery paper #180.

APPLICATIONS GUIDE

1   Recommended use    Interior wood applications
2   Product description    Two component acid cured clear finish
3   Mixing ratio   Base——–90 parts by volume.
Hardner—–10 parts by volume.
Thinner—–20 – 40 parts by volume.
4   Application Viscosity   For spraying – —15 – 20 sec by ford cup B4 @30°c.
For brushing – —20 – 25 sec by ford cup B4 @30°c.
5   Maturation time   30 minutes.
6   Pot life of mixture   8 hours.
7   Recommended spray ressure   30 – 40 PSI
8   Recommended DFT   25 – 30 microns
9    Drying characteristics 30 c & Relative humidity below 75%   Surface dry—–20minutes.
Sanding dry —-3 – 4 hours
Hard dry——–Overnight.
Fully Cured—–7 days for solvent &chemical
10   Recoating time   5 – 6 hours.
11   Thinner recommended   For spraying – # 424
For brushing – # 406
12   Covering capacity @ 25 micron DFT   5 – 6 sq.mtrs/litre/coat by spraying.
8 – 10 sq.mtrs/litre/coat by spraying.
13   Finish   Smooth, Matt and Glossy.
14   Packing   500 ml, 1 ltr, 4 ltrs, 20 ltrs.
15   Shelf life  3 year in unopened conditions in original
container when store in cool & dry place @ 25   ±5°C.

» SEALER COAT
Apply one or two coat of woodpol natural finish clear sealer and allow it to dry for minimum of 5-6 hours. Sand with emery paper #320 or 400 between application of successive coat.

» FINISH COAT
Select finish available in matt or glossy. Alternatively the two can be mix in desire proportions for semi glossy to satin finish of desire sheen. Apply one or two coats of woodpol natural wood finish clear matt or glossy & allow it to dry for minimum of 5-6 hours. Sand with emery paper #320 & 400 between application of successive coat.

FOR PRE POLISHED WOOD
Sand the surface along the grain with emery paper #100 or #180 followed by #320 or 400 to a uniform smooth surface. If staining is desired, completely remove the old finish by using EASY STRIPP Paint & Varnish Remover. Follow step number (2) & (3) recommended above for new wood.

WOODPOL NATURAL WOOD FINISH CLEAR – MELAMINISED

GENERAL INFORMATION

»  Stir the contents well before use since soft sedimentation may occur in matt and sealer finish on storage. Strain through musclin cloth in glass or plastic container. Mixing pot, stirrer & spray gun should be free of moisture since system is sensitive to moisture.
»  Mix only required amount of Base & Hardner to be used. Do not transfer unused or Left – over material after used into original container as it cause the whole container to gelled up.
»  Since system have limited Pot-life (after mixing Base & Hardner) after which they should not be used.
»  Recoating and Hard dry time may be more in case of High humid conditions and/or low ambient temperature.
»  Coverage & dry time varies depend on film thickness, quantity of thinner used & nature of wood.

NOTE: Product code 08,09,10 Woodpol Natural Wood Finish Crystal Clear Melaminised (Non yellowing) is color less in appearance & it gets yellow after 2 to 3 years and rest of the procedure and properties are same as regular Melaminised wood finish.

HEALTH AND SAFETY INFORMATION

»  Handle products in areas of good ventilation. Avoid inhaling vapours since product contains volatile organic solvents.
»  Wear normal protective overalls. Solvent resistant hand gloves, eye goggles are recommended. Avoid skin contact.
»  The product is flammable and the container should therefore be kept away from fire & spark or any ignition source.

STORAGE, HANDLING & DISPOSAL
»  Store in original container in cool, dry & well ventilated place.
»  While Handling, avoid inhalation and skin contact. Force ventilation or fresh air mask should be used in confined spaces.
»  Dispose in land filling and not in drain or water ways.

Additional information

Pack size

, , , ,

Resources

Download file here

WOODPOL NATURAL WOOD FINISH CLEAR-MELAMINISED

Reviews

There are no reviews yet.

Be the first to review “Woodpol Melaminised Sealer Filler Primer White (5)”

Your email address will not be published. Required fields are marked *