|1||Areas of application||Metal and Wood|
|2||Consistency of supply||Semi viscous to smooth semi paste|
|3||Appearance||Almost water white & clear liquid|
|4||Method of application||Apply by brush or spray|
|5||Stripping time||15 mins. to one hour depend upon substrate & type of paint to be remove.|
|6||Thinner recommended||FOR WOOD: Apply as such WITHOUT THINNING with brush.
FOR METAL: BRUSHING: Apply as such WITHOUT THINNING with brush.
SPRAYING: Thinn with good quality NC thinner, 30 – 50% (w/v) & apply by spray
|8||Packing||250 gms, 500 gms, 1kg, 5 kgs, 20 kgs.|
EASY STRIPP – PAINT & VARNISH REMOVER
DIRECTION FOR USE
FOR WOOD & METAL SURFACE WITHOUT DILUTING
» Lightly sand the surface with little coarse sand paper for better stripping action.
» apply heavy coat of EASY STRIPP liberally by brush to all surface being stripped without thinning. The thicker the coat, the more effective the stripping action. Ready to use (without thinning) type is designed chiefly to stripp paint from wooden surface.
» Allow EASY STRIPP to remain untill the paint softened & blistered. The stripping time depends upon the type of varnish or paint used & thickness of paint film. The thicker the film the more time required for stripping action.
» Remove the swell paint film by gently scrapping with putty knife with ease. Do not keep in prolonged contact with wood as it may damaged veneered furniture.
» Reapply stripper if finish is not completely removed & follow the step (2) (3) & (4).
» Keep container closed when not in use.
ONLY FOR METAL SURFACE WITH THINNING FOR SPRAY
» Dilute the EASY STRIPP with good quality NC thinner & spray on metal surface like car, truck, bus & home appliance like refrigerators, cupboard & fans & follow step (2) (3) & (4) as recommended above.
» Before using by spray, check the compatibility of NC thinner with EASY STRIPP & proceed.
» Do not use spray method on wooden surface as stripping action may reduces on dilution, especially for two pack wood finish.
HEALTH & SAFETY INFORMATION
Although no chemical is entirely free from hazard, these products will present moderate to low risk to health provided that good standards of industrial hygiene are observed in there storage & use.
» Handle products is area of good ventilation. Avoid inhaling since product contains volatile organic solvents.
» Wear normal protective overall. Solvent resistance hand gloves, eye goggles are recommended. Avoid eye & skin contact.
STORAGE, HANDLING & DISPOSAL
» Store in original container is cool, dry & well ventilated place.
» Keep out of the reach of children.
» While handling avoid inhalation and skin contact. Force ventilation or fresh air mask should be used in confined spaces.
» Dispose in land filling and not in drawn or water ways.