Description
APPLICATIONS PROCEDURE
DIRECTION FOR USE: For New Wood
1. Wooden articles to be coated must be dry & free of dust, dirt grease and moisture. Sand the surface along the grains with Emery paper #180 or with a suitable grade of sand paper. Brush the surface free of loose dust.
2. If desired, apply wood stains at this stage by wiping or spraying for desired shade or tone.
3. Apply thin coat of WOODPOL SHELLAC CLEAR WOOD POLISH with a pad of soft cotton with circular motion for better grain filling.
4. Apply a repeated coat at an regular intervals till good finish is obtained.
5. It is recommended to sand the surface with suitable grade sand paper intermittently after few coats for better grain filling & smoothness.
6. For Best results, it is advisable to apply repeated coat to enhance gloss level & smooth finish, giving sufficient time for drying between the coats.
TECHNICAL DATA
| Product Description | Clear wood finish. |
| Appearance | Pale yellow, almost clear liquid. |
| Consistency | Ready to use. |
| Method of applications | By rubbing with soft cotton pad. |
| Areas of applications | Wood (Interior application). |
| Finish | Smooth and Glossy. |
| Packing | 250 ml, 500 ml, 1 Ltr, 5 Ltrs, 20 ltrs. |
FOR PREPOLISHED WOOD:
1. Sand the surface along the grain with Emery paper #100 or 180 followed by #320 to get a smooth uniform surface. If staining is desired, completely remove the old finish.
2. Follow the procedure given above.
| PROPERTIES | WOODPOL SHELLAC CLEAR WOOD FINISH | WOODPOL SHELLAC SPECIAL CLEAR WOOD FINISH | ALCOHOLIC BASED FRENCH POLISH |
| Gloss | GOOD | VERY GOOD | MODERATE |
| Levelling | VERY GOOD | VERY GOOD | MODERATE |
| Slip | HIGH | HIGH | Poor |
| Filling Properties | GOOD | GOOD | Good |
| Sandability | GOOD | VERY GOOD | MODERATE |
| Build | GOOD | VERY GOOD | Poor |
| Adhesion | VERY GOOD | GOOD | Good |
| Water resistance | VERY GOOD | VERY GOOD | OK |
| Application Problem (with change in weathering conditions) | MODERATE | MODERATE | Moderate to high |
| DURABILITY | EXCELLENT | VERY GOOD | VERY GOOD |
| Coverage | 25 % more | 25 % more | – |
N. B.
1. The comparison test performed by taking French polish as standard.
2. Performance test of French polish may vary from manufacture to manufacture
HEALTH & SAFETY INFORMATION
1. Handle products is area of good ventilation. Avoid inhaling since product contains volatile organic solvents.
2. The product is flammable and the container should therefore be kept away from fire & spark or any ignition source
STORAGE, HANDLING & DISPOSAL:
1. Store in original container in cool, dry & well ventilated place.
2. While Handling, avoid inhalation.
3. Dispose in land filling and not in drain or water ways.
Reviews
There are no reviews yet.